| FINSIO(4) | Device Drivers Manual | FINSIO(4) |
finsio — Fintek
LPC Super I/O driver
finsio0 at isa? port 0x4e
The finsio driver provides support for the
Fintek F71805F, F71806F, F71862FG, F71872, F71882 and F71883 LPC Super I/O
chips.
Only the Hardware Monitor device is supported and it provides you to monitor the sensors through the envsys(4) API.
The finsio Super I/O Hardware Monitor
supports 15 sensors (this depends on the chip ID):
| Sensor | Units | Typical Use |
IN0 |
uV DC | Internal 3.3Vcc |
IN1 |
uV DC | Memory Vtt |
IN2 |
uV DC | RAM Vcc |
IN3 |
uV DC | Chipset V |
IN4 |
uV DC | +5V |
IN5 |
uV DC | +12V |
IN6 |
uV DC | Vcc 1.5V |
IN7 |
uV DC | Vcore |
IN8 |
uV DC | Vsb |
IN9 |
uV DC | Vbat (optional) |
Temp1 |
uK | CPU Temperature |
Temp2 |
uK | Motherboard Temperature |
Temp3 |
uK | (undefined) |
Fan0 |
RPM | CPU Fan |
Fan1 |
RPM | User Fan1 |
Fan2 |
RPM | User Fan2 |
The finsio driver first appeared in
NetBSD 5.0.
The finsio driver was written by
Geoff Steckel and Juan Romero
Pardines.
| April 3, 2008 | NetBSD 11.0 |