Short: A clone/remake of Chips Challenge Author: Brian Raiter, AOS4 port by Spot / Up Rough, based on the MOS port by Herbert 'HAK' Klackl Uploader: spot triad se (Spot / Up Rough) Type: game/think Version: 1.3.0 Requires: AmigaOS 4.0 and utilizes original datafiles if found! Architecture: ppc-amigaos >= 4.0.0 Welcome to Tile World Tile World is an emulation of the game "Chip's Challenge" for the Atari Lynx, created by Chuck Sommerville, and later ported to MS Windows by Microsoft (among other ports). Important Note Tile World is an emulation of the "Chip's Challenge" game engines only. It does not come with the chips.dat file that contains the original level set. That file, which is copyrighted and cannot be freely distributed, was originally distributed with the MS version of "Chip's Challenge". If you have a copy of this version of the game, you can use that file to play the original games in Tile World. If you do not have a copy of this file, however, you can still play Tile World with the many freely available level files created by fans of the original game. Installing Tile World under Windows First of all, you'll want to store the files contained in this archive into its own separate directory. If you're using the self-extracting executable, you can create a new directory during the installation. Otherwise, you'll need to create a new directory beforehand -- something like c:tworld -- and extract the files in there. If you have a copy of the chips.dat data file, copy it to the data subdirectory. This will allow you to play the original levels under Tile World (for the MS ruleset and the Lynx ruleset both). If you have other data files that you would like to try out in Tile World, copy those to the sets directory. The shell commands to do the above would look something like: cd c:wherevermycopyofchipschallengeisat copy chips.dat c:tworlddata cd c:mycollectionofdatfiles copy *.dat c:tworldsets That's all that needs to be done to set it up. Run the program as c:tworldtworld, or create a shortcut for it. Installing Tile World under Linux Before proceeding, ensure that you have SDL installed on your machine. (If you don't have SDL, you can get it by visiting http://www.libsdl.org/download.html. If you download a precompiled version -- i.e., an .rpm or .deb file -- note that you will need the development runtime, as opposed to the binary runtime.) Installing Tile World involves the usual three-part incantation: ./configure By default, the program is set up so that it will keep its shared files under /usr/local/share/tworld. If you would prefer the tworld directory to be somewhere besides /usr/local/share, use the --datadir option to change it when you run ./configure. Alternately, you can use the --with-sharedir=DIR option to explicitly specify a completely different path. (This value can also be changed at runtime, either via the TWORLDDIR environment variable or via the command line.) make There shouldn't be any serious warnings from the compiler. Use "make mklynxcc" if you want to also build a copy of mklynxcc (see below). make install Running "make install" as root will do the following: * Copy the tworld binary to /usr/local/games. * Copy the tworld.6 manpage to /usr/local/man/man6. * Create /usr/local/share/tworld if it does not exist. (Or whatever directory you specified to ./configure.) * Copy the external resources (i.e., the bitmaps and wave files) to /usr/local/share/tworld/res. * Create the directories /usr/local/share/tworld/data and /usr/local/share/tworld/sets. The sets directory is where you will generally store the .dat files that you want to use. However, if you want to make use of a configuration file with a particular data file, then you will need to store the data file in the data directory, and the configuration file goes into the sets directory instead. See the documentation for more information. Level Sets As mentioned above, the original "Chip's Challenge" level set does not come with Tile World, for reasons of copyright. If you do not already have a copy of Microsoft's Windows version of "Chip's Challenge", you might still be able to find a copy. Search the links listed below, under "Resources on the Internet", for helpful hints on finding the game online. If and when you do, you can copy the chips.dat file from there into Tile World's data directory. You will then be able to play the levels of the original set (both in MS mode and in Lynx mode). There are also many "user-created" level sets. These are sets of levels which have been invented by fans of the game. These sets are freely available for downloading. If you have a .dat file that contains a level set and you wish to use it, just copy it to Tile World's sets directory. The next time you start Tile World, the new .dat should appear in the list of available level sets. At http://groups.yahoo.com/group/chips_challenge/files/ is a repository of the available level sets that have been created. The biggest fans of the game try to provide a copy of every known user-created level set at this place. I have not included any of these level sets in this distribution, as the authors continue to add new levels to their sets over time. Actually, this distribution does contain one small level set. This is included so that even if you don't have the original level set, you can still get a brief glimpse of how the game works, and what some of the most basic challenges are. Also, the same set of levels can be played with both the MS and Lynx ruleset, so you can see how they differ. Finally, there is one level set that is special and deserves particular mention. That is CCLP2.dat, or "Chip's Challenge Level Pack 2". This set was assembled by the fans, who voted on all of the user-created levels that existed at the time. The levels that were voted as being the most fun were then all put together to become CCLP2. It is the closest thing we have to a sequel for the original game. (But be careful: CCLP2 is much harder than the original!) You can download a copy of Tile World with this set already installed. If instead you download it separately, you will want to store it in your data directory instead of your sets directory. (This is because Tile World comes with a special configuration file for CCLP2.) The Complete Documentation The full documentation for Tile World is included with the distribution, in the file tworld.html. There you will find information on how to play the game, adding new level sets, customizing Tile World, and more. Creating New Level Sets The most widely used program for creating new level sets is ChipEdit. It comes with excellent documentation, and you should have little trouble learning how to use it. Some other editors have recently been made available, such as CCEdit and Chip's Workshop. Normally, ChipEdit creates levels for the MS ruleset. If you wish to make a level set for the Lynx ruleset, you have a few options: * A very simple command-line utility is included with Tile World, called mklynxcc. This program will change a normal .dat file to one that will use the Lynx ruleset instead of the MS ruleset. Running mklynxcc foo.dat will change foo.dat's ruleset from MS to Lynx. * You can use a configuration file to override the builtin ruleset. This method requires creating an extra file, but does allows you to avoid making changes to the .dat file. See the complete documentation for information on how to set up a configuration file. * Finally, ChipEdit has an obscure feature which allows you to control the signature of the data file. This is done by adding a SIGNATURE entry to the chipedit.ini file. The default signature value is 0x0002AAAC, which indicates a data file that uses the MS ruleset. If you set the SIGNATURE to be 0x0102AAAC, then ChipEdit will create data files marked to use the Lynx ruleset instead. Resources on the Internet There is quite a bit of information about "Chip's Challenge" available on the internet. Much of it is focused on maximizing your score on the original level set for the MS game, but you will also find lots of general help and useful information as well. Jimmy Vermeer maintains a site that tracks people's scores on the original level set and CCLP2, as well as information on other levels and links to many other pages. http://www.geocities.com/purpletentacle1977ca/ Anders Kaseorg's site contains the Chip's Challenge FAQ, as well as the AVI repository and a web interface to the newsgroup: http://chips.kaseorg.com/ The grand repository of user-created level sets can be found at the chips_challenge Yahoo group: http://groups.yahoo.com/group/chips_challenge/files/ ChipEdit's home page is at: http://www.stage62.com/chipedit/chipedit.htm Finally, Tile World's home page is at: http://www.muppetlabs.com/~breadbox/software/tworld/ License Tile World is copyright (C) 2001-2006 by Brian Raiter. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License, included in this distribution in the file COPYING, for more details. Bugs Bug reports are always appreciated, and can be sent to the author at breadboxmuppetlabs.comcom. The list of known bugs is at http://www.muppetlabs.com/~breadbox/software/tworld/BUGS.html. Please check here before sending a bug report, to to make sure the bug has not already been documented. Credits Tile World was written by Brian Raiter. The sound effects included in this distribution were created by Brian Raiter, with assistance from SoX. Brian Raiter has explictly placed these files in the public domain. The tile images included in this distribution were created by Anders Kaseorg, with assistance from POV-Ray. Anders Kaseorg has explicitly placed these files in the public domain. The introductory set of levels included in this distribution were created by Brian Raiter. Brian Raiter has explictly placed these levels in the public domain. "Chip's Challenge" was designed by Chuck Sommerville, who is also the author of the original Lynx program. "Chip's Challenge" is a registered trademark of Alpha Omega Publications. Creating this program would have been flatly impossible without the help of several fans of "Chip's Challenge". The author would particularly like to acknowledge Anders Kaseorg for sharing the fruits of his investigations into the game logic of the MS version and for being an effective bug hunter, Chuck Sommerville for his pointers regarding the game logic of the Lynx version and his unfailing support of this project, and "CCExplore" for his in-depth investigations of esoteric game behavior. Many other regulars of the annexcafe.chips.challenge newsgroup assisted with bug reports, suggestions, and all-around encouragement. Their help is gratefully acknowledged. The anonymous author of the document describing the .dat file format, Don Gregory, the "Charter Chipsters", and the contributors to the CC AVI library all deserve mention as well -- this program would never have been written without the information they made freely available. Last but not least, a tip of the hat to John K. Elion for writing ChipEdit. Brian Raiter April 2006