Internet Engineering Task Force (IETF) D. Benjamin Request for Comments: 9618 Google LLC Updates: 5280 August 2024 Category: Standards Track ISSN: 2070-1721 Updates to X.509 Policy Validation Abstract This document updates RFC 5280 to replace the algorithm for X.509 policy validation with an equivalent, more efficient algorithm. The original algorithm built a structure that scaled exponentially in the worst case, leaving implementations vulnerable to denial-of-service attacks. Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc9618. Copyright Notice Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction 1.1. Summary of Changes from RFC 5280 2. Conventions and Definitions 3. Denial-of-Service Vulnerability 3.1. Policy Trees 3.2. Exponential Growth 3.3. Attack Vector 4. Avoiding Exponential Growth 4.1. Policy Graphs 4.2. Verification Outputs 5. Updates to RFC 5280 5.1. Updates to Section 6.1 5.2. Updates to Section 6.1.2 5.3. Updates to Section 6.1.3 5.4. Updates to Section 6.1.4 5.5. Updates to Section 6.1.5 5.6. Updates to Section 6.1.6 6. Other Mitigations 6.1. Verify Signatures First 6.2. Limit Certificate Depth 6.3. Limit Policy Tree Size 6.4. Inhibit Policy Mapping 6.5. Disable Policy Checking 7. Security Considerations 8. IANA Considerations 9. References 9.1. Normative References 9.2. Informative References Acknowledgements Author's Address 1. Introduction [RFC5280] defines a suite of extensions for determining the policies that apply to a certification path. A policy is described by an object identifier (OID) and a set of optional qualifiers. Policy validation in [RFC5280] is complex. As an overview, the certificate policies extension (Section 4.2.1.4 of [RFC5280]) describes the policies, with optional qualifiers, under which an individual certificate was issued. The policy mappings extension (Section 4.2.1.5 of [RFC5280]) allows a CA certificate to map its policy OIDs to other policy OIDs in certificates that it issues. Subject to these mappings and other extensions, the certification path's overall policy set is the intersection of policies asserted by each certificate in the path. The procedure in Section 6.1 of [RFC5280] determines this set in the course of certification path validation. It does so by building a policy tree containing policies asserted by each certificate and the mappings between them. This tree can grow exponentially in the depth of the certification path, which means an attacker, with a small input, can cause a path validator to consume excessive memory and computational resources. This cost asymmetry can lead to a denial- of-service vulnerability in X.509-based applications, such as [CVE-2023-0464] and [CVE-2023-23524]. Section 3 describes this vulnerability. Section 4.1 describes the primary mitigation for this vulnerability, a replacement for the policy tree structure. Section 5 provides updates to [RFC5280] that implement this change. Finally, Section 6 discusses alternative mitigation strategies for X.509 applications. 1.1. Summary of Changes from RFC 5280 The algorithm for processing certificate policies and policy mappings is replaced with one that builds an equivalent but much more efficient structure. This new algorithm does not change the validity status of any certification path or which certificate policies are valid for it. 2. Conventions and Definitions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 3. Denial-of-Service Vulnerability This section discusses how the path validation algorithm defined in Section 6.1.2 of [RFC5280] can lead to a denial-of-service vulnerability in X.509-based applications. 3.1. Policy Trees Section 6.1.2 of [RFC5280] constructs the valid_policy_tree, a tree of certificate policies, during certification path validation. The nodes at any given depth in the tree correspond to policies asserted by a certificate in the certification path. A node's parent policy is the policy in the issuer certificate that was mapped to this policy, and a node's children are the policies the node was mapped to in the subject certificate. For example, suppose a certification path contains: * An intermediate certificate that asserts the following policy OIDs: OID1, OID2, and OID5. It contains mappings from OID1 to OID3 and from OID1 to OID4. * An end-entity certificate that asserts the following policy OIDs: OID2, OID3, and OID6. This would result in the tree shown below. Note that OID5 and OID6 are not included or mapped across the whole path, so they do not appear in the final structure. +-----------+ Root: | anyPolicy | +-----------+ |{anyPolicy}| +-----------+ / \ / \ v v +------------+ +------------+ Intermediate: | OID1 | | OID2 | (OID5 discarded) +------------+ +------------+ |{OID3, OID4}| | {OID2} | +------------+ +------------+ | | | | v v +------------+ +------------+ End-entity: | OID3 | | OID2 | (OID6 discarded) +------------+ +------------+ The complete algorithm for building this structure is described in steps (d), (e), and (f) in Section 6.1.3 of [RFC5280]; steps (h), (i), and (j) in Section 6.1.4 of [RFC5280]; and steps (a), (b), and (g) in Section 6.1.5 of [RFC5280]. 3.2. Exponential Growth The valid_policy_tree grows exponentially in the worst case. In step (d.1) in Section 6.1.3 of [RFC5280], a single policy P can produce multiple child nodes if multiple issuer policies map to P. This can cause the tree size to increase in size multiplicatively at each level. In particular, consider a certificate chain where every intermediate certificate asserts policies OID1 and OID2 and then contains the full Cartesian product of mappings: * OID1 maps to OID1 * OID1 maps to OID2 * OID2 maps to OID1 * OID2 maps to OID2 At each depth, the tree would double in size. For example, if there are two intermediate certificates and one end-entity certificate, the resulting tree would be as depicted in Figure 1. +-----------------------+ | anyPolicy | +-----------------------+ | {anyPolicy} | +-----------------------+ / \ / \ v v +------------+ +------------+ | OID1 | | OID2 | +------------+ +------------+ |{OID1, OID2}| |{OID1, OID2}| +------------+ +------------+ / \ / \ / \ / \ v v v v +------------+ +------------+ +------------+ +------------+ | OID1 | | OID2 | | OID1 | | OID2 | +------------+ +------------+ +------------+ +------------+ |{OID1, OID2}| |{OID1, OID2}| |{OID1, OID2}| |{OID1, OID2}| +------------+ +------------+ +------------+ +------------+ | | | | | | | | v v v v v v v v +------+ +------+ +------+ +------+ +------+ +------+ +------+ +------+ | OID1 | | OID2 | | OID1 | | OID2 | | OID1 | | OID2 | | OID1 | | OID2 | +------+ +------+ +------+ +------+ +------+ +------+ +------+ +------+ Figure 1: An Example X.509 Policy Tree with Exponential Growth 3.3. Attack Vector An attacker can use the exponential growth to mount a denial-of- service attack against an X.509-based application. The attacker sends a certificate chain as described in Section 3.2 and triggers the target application's certificate validation process. For example, the target application may be a TLS server [RFC8446] that performs client certificate validation. The target application will consume far more resources processing the input than the attacker consumed to send it, which prevents the target application from servicing other clients. 4. Avoiding Exponential Growth This document mitigates the denial-of-service vulnerability described in Section 3 by replacing the policy tree with a policy graph structure, which is described in this section. The policy graph grows linearly instead of exponentially. This removes the asymmetric cost in policy validation. X.509 implementations SHOULD perform policy validation by building a policy graph, following the procedure described in Section 5. This replacement procedure computes the same policies as in [RFC5280], but one of the outputs is in a different form. See Section 4.2 for details. Section 6 describes alternative mitigations for implementations that depend on the original, exponential-sized output. 4.1. Policy Graphs The tree structure in [RFC5280] is an unnecessarily inefficient representation of a certification path's policy mappings. When multiple issuer policies map to a single subject policy, the subject policy will correspond to multiple duplicate nodes in the policy tree. Children of the subject policy are then duplicated recursively. This duplication is the source of the exponential growth described in Section 3.2. A policy graph represents the same information with a directed acyclic graph of policy nodes. It eliminates this duplication by using a single node with multiple parents. See Section 5 for the procedure for building this structure. Figure 2 shows the updated representation of the example in Figure 1. +-----------+ | anyPolicy | +-----------+ |{anyPolicy}| +-----------+ / \ / \ v v +------------+ +------------+ | OID1 | | OID2 | +------------+ +------------+ |{OID1, OID2}| |{OID1, OID2}| +------------+ +------------+ | \ / | | \ / | | \/ | | /\ | | / \ | v v v v +------------+ +------------+ | OID1 | | OID2 | +------------+ +------------+ |{OID1, OID2}| |{OID1, OID2}| +------------+ +------------+ | \ / | | \ / | | \/ | | /\ | | / \ | v v v v +------------+ +------------+ | OID1 | | OID2 | +------------+ +------------+ Figure 2: A More Efficient Representation of an X.509 Policy Tree This graph's size is bounded linearly by the total number of certificate policies (Section 4.2.1.4 of [RFC5280]) and policy mappings (Section 4.2.1.5 of [RFC5280]). The policy tree in [RFC5280] is the tree of all paths from the root to a leaf in the policy graph, so no information is lost in the graph representation. 4.2. Verification Outputs Section 6.1.6 of [RFC5280] describes the entire valid_policy_tree structure as an output of the verification process. However, Section 12.2 of [X.509] only describes the following as outputs: the authorities-constrained policies, the user-constrained policies, and their associated qualifiers. As the valid_policy_tree is the exponential structure, computing it reintroduces the denial-of-service vulnerability. X.509 implementations SHOULD NOT output the entire valid_policy_tree structure; instead, they SHOULD limit output to just the set of authorities-constrained and/or user-constrained policies, as described in [X.509]. Sections 5.6 and 6 discuss other mitigations for applications where this option is not available. X.509 implementations MAY omit policy qualifiers from the output to simplify processing. Note that Section 4.2.1.4 of [RFC5280] already recommends that certification authorities omit policy qualifiers from policy information terms. 5. Updates to RFC 5280 This section provides updates to [RFC5280]. These updates implement the changes described in Section 4. 5.1. Updates to Section 6.1 Section 6.1 of [RFC5280] is updated as follows: OLD: | A particular certification path may not, however, be appropriate | for all applications. Therefore, an application MAY augment this | algorithm to further limit the set of valid paths. The path | validation process also determines the set of certificate policies | that are valid for this path, based on the certificate policies | extension, policy mappings extension, policy constraints | extension, and inhibit anyPolicy extension. To achieve this, the | path validation algorithm constructs a valid policy tree. If the | set of certificate policies that are valid for this path is not | empty, then the result will be a valid policy tree of depth n, | otherwise the result will be a null valid policy tree. NEW: | A particular certification path may not, however, be appropriate | for all applications. Therefore, an application MAY augment this | algorithm to further limit the set of valid paths. The path | validation process also determines the set of certificate policies | that are valid for this path, based on the certificate policies | extension, policy mappings extension, policy constraints | extension, and inhibit anyPolicy extension. To achieve this, the | path validation algorithm constructs a valid policy set, which may | be empty if no certificate policies are valid for this path. 5.2. Updates to Section 6.1.2 The following replaces entry (a) in Section 6.1.2 of [RFC5280]: | (a) valid_policy_graph: A directed acyclic graph of certificate | policies with their optional qualifiers; each of the leaves | of the graph represents a valid policy at this stage in the | certification path validation. If valid policies exist at | this stage in the certification path validation, the depth of | the graph is equal to the number of certificates in the chain | that have been processed. If valid policies do not exist at | this stage in the certification path validation, the graph is | set to NULL. Once the graph is set to NULL, policy | processing ceases. Implementations MAY omit qualifiers if | not returned in the output. | | Each node in the valid_policy_graph includes three data | objects: the valid policy, a set of associated policy | qualifiers, and a set of one or more expected policy values. | | Nodes in the graph can be divided into depths, numbered | starting from zero. A node at depth x can have zero or more | children at depth x+1 and, with the exception of depth zero, | one or more parents at depth x-1. No other edges between | nodes may exist. | | If the node is at depth x, the components of the node have | the following semantics: | | (1) The valid_policy is a single policy OID representing a valid | policy for the path of length x. | | (2) The qualifier_set is a set of policy qualifiers associated | with the valid policy in certificate x. It is only necessary | to maintain this field if policy qualifiers are returned to | the application. See Section 6.1.5, step (g). | | (3) The expected_policy_set contains one or more policy OIDs that | would satisfy this policy in the certificate x+1. | | The initial value of the valid_policy_graph is a single node | with valid_policy anyPolicy, an empty qualifier_set, and an | expected_policy_set with the single value anyPolicy. This | node is considered to be at depth zero. | | The graph additionally satisfies the following invariants: | | * For any depth x and policy OID P-OID, there is at most one node | at depth x whose valid_policy is P-OID. | | * The expected_policy_set of a node whose valid_policy is | anyPolicy is always {anyPolicy}. | | * A node at depth x whose valid_policy is anyPolicy, except for | the one at depth zero, always has exactly one parent: a node at | depth x-1 whose valid_policy is also anyPolicy. | | * Each node at depth greater than 0 has either one or more parent | nodes whose valid_policy is not anyPolicy or a single parent | node whose valid_policy is anyPolicy. That is, a node cannot | simultaneously be a child of both anyPolicy and some non- | anyPolicy OID. | | Figure 3 is a graphic representation of the initial state of | the valid_policy_graph. Additional figures will use this | format to describe changes in the valid_policy_graph during | path processing. | | +----------------+ | | anyPolicy | <---- valid_policy | +----------------+ | | {} | <---- qualifier_set | +----------------+ | | {anyPolicy} | <---- expected_policy_set | +----------------+ | | Figure 3: Initial Value of the valid_policy_graph State | Variable 5.3. Updates to Section 6.1.3 The following replaces steps (d), (e), and (f) in Section 6.1.3 of [RFC5280]: | (d) If the certificate policies extension is present in the | certificate and the valid_policy_graph is not NULL, process | the policy information by performing the following steps in | order: | | (1) For each policy P not equal to anyPolicy in the certificate | policies extension, let P-OID denote the OID for policy P and | P-Q denote the qualifier set for policy P. Perform the | following steps in order: | | (i) Let parent_nodes be the nodes at depth i-1 in the | valid_policy_graph where P-OID is in the | expected_policy_set. If parent_nodes is not empty, create a | child node as follows: set the valid_policy to P-OID, set | the qualifier_set to P-Q, set the expected_policy_set to | {P-OID}, and set the parent nodes to parent_nodes. | | For example, consider a valid_policy_graph with a node of | depth i-1 where the expected_policy_set is {Gold, White} and | a second node where the expected_policy_set is {Gold, | Yellow}. Assume the certificate policies Gold and Silver | appear in the certificate policies extension of certificate | i. The Gold policy is matched, but the Silver policy is | not. This rule will generate a child node of depth i for | the Gold policy. The result is shown as Figure 4. | | +-----------------+ +-----------------+ | | Red | | Blue | | +-----------------+ +-----------------+ | | {} | | {} | depth i-1 | +-----------------+ +-----------------+ | | {Gold, White} | | {Gold, Yellow} | | +-----------------+ +-----------------+ | \ / | \ / | \ / | v v | +-----------------+ | | Gold | | +-----------------+ | | {} | depth i | +-----------------+ | | {Gold} | | +-----------------+ | | Figure 4: Processing an Exact Match | | (ii) If there was no match in step (i) and the valid_policy_graph | includes a node of depth i-1 with the valid_policy | anyPolicy, generate a child node with the following values: | set the valid_policy to P-OID, set the qualifier_set to P-Q, | set the expected_policy_set to {P-OID}, and set the parent | node to the anyPolicy node at depth i-1. | | For example, consider a valid_policy_graph with a node of | depth i-1 where the valid_policy is anyPolicy. Assume the | certificate policies Gold and Silver appear in the | certificate policies extension of certificate i. The Gold | policy does not have a qualifier, but the Silver policy has | the qualifier Q-Silver. If Gold and Silver were not matched | in (i) above, this rule will generate two child nodes of | depth i, one for each policy. The result is shown as | Figure 5. | | +-----------------+ | | anyPolicy | | +-----------------+ | | {} | | +-----------------+ depth i-1 | | {anyPolicy} | | +-----------------+ | / \ | / \ | / \ | v v | +-----------------+ +-----------------+ | | Gold | | Silver | | +-----------------+ +-----------------+ | | {} | | {Q-Silver} | depth i | +-----------------+ +-----------------+ | | {Gold} | | {Silver} | | +-----------------+ +-----------------+ | | Figure 5: Processing Unmatched Policies When a Leaf Node | Specifies anyPolicy | | (2) If the certificate policies extension includes the policy | anyPolicy with the qualifier set AP-Q and either (a) | inhibit_anyPolicy is greater than 0 or (b) i. [RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . 9.2. Informative References [CVE-2023-0464] CVE, "Excessive Resource Usage Verifying X.509 Policy Constraints", CVE-2023-0464, March 2023, . [CVE-2023-23524] CVE, "Processing a maliciously crafted certificate may lead to a denial-of-service", CVE-2023-23524, February 2023, . [RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018, . [X.509] ITU-T, "Information technology - Open Systems Interconnection - The Directory: Public-key and attribute certificate frameworks", ITU-T Recommendation X.509, October 2019, . Acknowledgements The author thanks Bob Beck, Adam Langley, Matt Mueller, and Ryan Sleevi for many valuable discussions that led to discovering this issue, understanding it, and developing the mitigation. The author also thanks Martin Thomson, Job Snijders, and John Scudder for their review and feedback on this document. Author's Address David Benjamin Google LLC Email: davidben@google.com